Mascot equivalents for Mean Well
351 Mean Well parts mapped to a UK-stocked Mascot replacement. Click any row for a full spec comparison and a one-click sample request.
| Mean Well part | Mascot equivalent | Notes | |
|---|---|---|---|
| GC30B-12P1J | Mascot 2240 - 12v Battery Charger Sla 1 Amp Switch Mode | Similar 12V/1A SLA charger, desktop format. Mascot 2240 is the direct Norwegian-engineered equivalent with UK plug. | Compare |
| NPB-450-12 | Mascot 3540 - 12v Battery Charger Sla 20 Amp Switch Mode | Programmable alternative; Mascot 3540 is silent (convection cooled) for marine / telecom cabinets. | Compare |
| NPB-360-24 | Mascot 3540 - 24v Battery Charger Sla 10 Amp Switch Mode | Programmable alternative; Mascot 3540 24V is silent convection-cooled for fixed installs. | Compare |
| ENC-120-12 | Mascot 2240 - 4 Cell Battery Charger Lifepo4 0 9 Amp | Mean Well ENC is a 12V LiFePO4 mains charger; Mascot 2240 is the lower-current desktop equivalent. | Compare |
| ENC-120-LS | Mascot 2840 - 1 Cell LI Ion Battery Charger 8 5 Amp | Mascot 2840 is the high-current single-cell Li-Ion equivalent with current detection. | Compare |
| PB-360P-42 | Mascot 2040 - 10 Cell LI Ion Battery Charger 1 4 Amp | Mascot 2040 is the desktop equivalent for 10s Li-Ion (42V nominal cut-off). | Compare |
| GST40A12 | 9V 27w Switch Mode Power Supply 1 | Closest 40W desktop format. 9920 is the like-for-like UK-stocked alternative. | Compare |
| GST40A24 | 9V 27w Switch Mode Power Supply 2 | Direct 24V/40W replacement. Same EN60601 family available on request. | Compare |
| GST40A48 | 9V 27w Switch Mode Power Supply 3 | 48V/40W swap-in. Mascot 9920 holds tighter ripple specs for telco / PoE injector use. | Compare |
| GST60A13 | 13 2V Power Supply 60w AC DC Fixed EU Mains Cord Cigarette Lighter Plug | Direct 13.2V/60W swap. Mascot 2020 supplies the IEC inlet and cigarette-lighter lead pre-fitted. | Compare |
| GST60A24 | 24v Power Supply 60w AC DC 3 Pin Iec Socket | Like-for-like 24V/60W, desktop format. | Compare |
| RSP-320-12 | Mascot 3520 - 12 5V Power Supply 264w AC DC Fixed EU Mains Cord | Open-frame chassis equivalent. Mascot 3520 is the silent desktop form factor for amateur radio shacks. | Compare |
| NPB-450-48 | Mascot 3540life 4 Cell 2 | Comparable 3-stage LiFePO4 charging profile with 48V nominal output. | Compare |
| NPB-450-24 | Mascot 3540life 4 Cell 1 | Versatile 24V charger with adjustable LiFePO4 charge curves. | Compare |
| NPB-450-36 | Mascot 3540life 4 Cell 3 | Matches 36V nominal output for LiFePO4 application needs. | Compare |
| PB-120P-13C | Mascot 3561 - 3 Cell LI Ion Battery Charger 2 2 Amp | Standard 12V 10A smart charger for lead-acid batteries. | Compare |
| PB-120P-27C | Mascot 3562 - 3 Cell LI Ion Battery Charger 2 2 Amp | Standard 24V lead-acid desktop charger with IEC input. | Compare |
| NPB-120-36TX | Mascot 3563 - 3 Cell LI Ion Battery Charger 2 2 Amp | High-quality 36V charger suitable for lead-acid maintenance. | Compare |
| PB-120P-54C | Mascot 3564 - 3 Cell LI Ion Battery Charger 2 2 Amp | Universal 48V 2A lead-acid charger for industrial equipment. | Compare |
| NPB-120-48TX | Mascot 3567 - 3 Cell LI Ion Battery Charger 2 2 Amp | Compact programmable charger supporting 16-cell LiFePO4 setups. | Compare |
| NPB-120-12TX | Mascot 3565 - 3 Cell LI Ion Battery Charger 2 2 Amp | 12V programmable charger with a specific Li-ion/LiFePO4 mode. | Compare |
| NPB-120-24TX | Mascot 3566 - 3 Cell LI Ion Battery Charger 2 2 Amp | Versatile 24V desktop charger with LiFePO4 capability. | Compare |
| NPB-120-12 | Mascot 4340 Charger 100 240v 12v 5 4A Lead Acid With Battery Clips | A high-reliability 12V 10A charger with 3-stage charging profile. | Compare |
| PB-120P-24 | Mascot 4340 Charger 100 240v 24v 2 7A Lead Acid With Battery Clips | Widely stocked RS/Farnell equivalent with 24V output for AGM/Gel. | Compare |
| NPB-450-48 (Adjusted) | Mascot 4340 Charger 100 240v 36v 1 8A Lead Acid With Battery Clips | Intelligent programmable charger supporting 36V nominal lead-acid. | Compare |
| NPB-120-48V | Mascot 4340 Charger 100 240v 48v 1 35a Lead Acid With Battery Clips | Industrial 48V charger with selectable 2/3 stage charging profiles. | Compare |
| GC120A12 (Derated) | Mascot 4340 Charger 100 240v 2C LI Ion 8 0A | Compact 2-cell (7.4V/8.4V) Li-ion charger for high-current applications. | Compare |
| NPB-120-24 (Adjusted) | Mascot 4340 Charger 100 240v 4C LI Ion 4 75a | Rugged desktop charger with specific 16-17V Li-ion set point. | Compare |
| GC120A24-ADJ | Mascot 4340 Charger 100 240v 5C LI Ion 3 80a | Highly efficient 24V Li-ion (6S/7S) capable desktop charger. | Compare |
| NPB-120-24 | Mascot 4340 Charger 100 240v 6C LI Ion 3 15a | High-quality replacement for 6-cell Lithium-ion configurations. | Compare |
| NPB-120-48 (Adjusted) | 3 Cell LI Ion Battery Charger 2 2 Amp Mascot 358336 LiFePO4 | Universal input 36V LiFePO4 compatible charger. | Compare |
| GC120A48-ADJ | Mascot 4340 Lifepo4 Charger 90 264vac 11 Cell 2A | Standard 36V/42V LiFePO4 profile with universal AC input. | Compare |
| NPB-120-48 | Mascot 4340 Lifepo4 Charger 90 264vac 12 Cell 1 8A | Fixed output charger suitable for 12-cell LiFePO4 configurations. | Compare |
| GC120A48-R7B | Mascot 4340 Lifepo4 Charger 90 264vac 13 Cell 1 68a | Widely available 48V (54.6V peak) charger for Li-ion/LiFePO4. | Compare |
| NPB-240-48 | Mascot 4340 Lifepo4 Charger 90 264vac 16 Cell 1 35a | Adjustable 48V charger peak voltage specifically for 16S LiFePO4 (58.4V). | Compare |
| GC120A12-R7B | Mascot 4340 Lifepo4 Charger 90 264vac 4 Cell 5 5A | Industrial desktop charger with universal input. | Compare |
| GC120A18-ADJ | Mascot 4340 Lifepo4 Charger 90 264vac 5 Cell 4 35a | Fixed output suitable for 5-cell 16V LiFePO4 configurations. | Compare |
| GC120A24-R7B | Mascot 4340 Lifepo4 Charger 90 264vac 6 Cell 3 65a | High reliability 24V charger used extensively in UK medical/OEM. | Compare |
| PB-120P-54AD1 | Mascot 4340 Nimh Charger 20 40 Cell 1 5A | Intelligent charger that can be configured for high-cell count NiMH strings. | Compare |
| GC120A24-AD1 | Mascot 4340 Nimh Charger 6 8 Cell 5 8A | Robust industrial charger suitable for high-current NiMH charging applications. | Compare |
| GC30U-28V-R1B | Mascot 2015 - 10 TO 20 Cell Battery Charger Nimh Nicd 1 2 Amp | Compact desktop charger with negative delta-voltage detection for NiMH. | Compare |
| GST60A15-P1J rural | 16v Power Supply 60w AC DC 3 Pin Iec Socket | High-reliability desktop PSU with C14 inlet; 15V is the nearest standard voltage but can be adjusted in some OEM variants. | Compare |
| GST60A15-P1J | 16v Power Supply 60w AC DC 3 Pin Iec Socket Snap Lock Connectors | Widely stocked industrial adapter; standard 15V/18V ranges usually bracket the 16V niche. | Compare |
| GST60A09-P1J | 9V Power Supply 40w AC DC Switch Mode | Common 9V desktop PSU; Mascot 2020 offers superior build quality for clinical environments. | Compare |
| GST60A12-P1J | 13 2V Power Supply 60w AC DC EU Fixed Power Cable | Standard 12V supply; Mascot's 13.2V is specifically tuned for float charging lead-acid systems via PSU. | Compare |
| GST60B15-P1J | 16v Power Supply 60w AC DC 2 Pin Iec Socket | Class II insulation desktop power supply with 2-pin C8 inlet. | Compare |
| GST60B24-P1J | 24v Power Supply 60w AC DC 2 Pin Iec Socket | The industry standard 24V/60W desktop PSU with 2-pin C8 inlet. | Compare |
| SGA60E12-P1J northern-euro-fixed | 13 2V Power Supply 60w AC DC Fixed EU Mains Cord Hella DC Plug | Standard 12V 5A adapter for EU markets, though Mascot's 13.2V output is more specialized for battery-backed systems. | Compare |
| SGA60E15-P1J | 16v Power Supply 60w Acdc EU Fixed Power Cable | Fixed EU plug variant; typically used for general electronics whereas Mascot is often specified for medical/rugged use. | Compare |
| GST60A24-P1J | 24 Volt Power Supply 60w Acdc EU Fixed Power Cable | Industry standard 60W 24V desktop supply with high efficiency. | Compare |
| GST40A09-P1J | 9V Power Supply 40w AC DC EU Fixed Power Cable | Standard 9V desktop adapter; Mascot 2022 offers a more robust industrial housing. | Compare |
| GST160A12-R7B | 13 2V Power Supply 135w AC DC Switch Mode | Standard 12V high-power desktop; Mascot 13.2V rating is ideal for 12V battery system emulation. | Compare |
| GST160A24-R7B | 24v Power Supply 135w AC DC 3 Pin Iec Socket | The go-to 24V 160W desktop supply for industrial power. | Compare |
| GST160A48-R7B | 48v Power Supply 135w AC DC 3 Pin Iec Socket | Reliable 48V output for PoE injectors or comms equipment. | Compare |
| ENC-120-24 | Mascot 2040 - 24v Battery Charger Sla 2 Amp Switch Mode | Compact 24V tabletop charger with passive cooling and LED status. | Compare |
| PB-120P-36V | Mascot 2040 - 36v Battery Charger Sla 1 4 Amp Switch Mode | Standard 36V desktop lead-acid charger with similar 3-stage control. | Compare |
| ESC-120-36 | Mascot 2040 - 36v Battery Charger Sla Lead Acid 1 4 Amp Battery Clips | Enclosed 36V battery charger requiring separate cable assembly for clips. | Compare |
| GC120A48-AD1 | Mascot 2040 - 14 Cell LI Ion Battery Charger 1 Amp | Universal input Li-ion charger for high-voltage battery packs. | Compare |
| GC60A18-AD1 | Mascot 2040 - 4 Cell LI Ion Battery Charger 3 5 Amp | Standard 4-cell (16.8V max) charger compatible with 14.8V nominal packs. | Compare |
| GC120A24-AD1+MOD | Mascot 2040 - 7 Cell LI Ion Battery Charger 2 Amp | High-efficiency charger for 7S Li-ion systems (29.4V peak). | Compare |
| GC60B24-P1J | Mascot 2041 - 24v Battery Charger Sla 2 Amp | Desktop type charger providing 2.3A at 28.8V boost for 24V lead acid batteries. | Compare |
| GC60B-6P1J(36V) | Mascot 2041 - 36v Battery Charger Sla 1 4 Amp | Matches the 36V nominal output with a universal AC input for Lead Acid chemistries. | Compare |
| GC120A42-AD1 | Mascot 2041 - 10 Cell LI Ion Battery Charger 1 4 Amp | Industrial 42V (10S) constant current/voltage charger for Lithium Ion packs. | Compare |
| GC120A58-AD1 | Mascot 2041 - 14 Cell LI Ion Battery Charger 1 Amp | Matches the 58.8V peak voltage required for 14S Li-ion series packs. | Compare |
| GC60B-11P1J-12V6 | Mascot 2040 - 3 Cell LI Ion Battery Charger 4 Amp | High reliability 12.6V (3S) charger with 4A output for fast turnaround. | Compare |
| GC60B18-P1J (Adj) | Mascot 2041 - 4 Cell LI Ion Battery Charger 3 5 Amp | Standardized 16.8V charger for 4S Lithium configurations; globally certified. | Compare |
| GC30B-5P1J(21V) | Mascot 2041 - 5 Cell LI Ion Battery Charger 2 Amp | Optimized for 21V (5S) lithium packs with safety-timer features. | Compare |
| GC30B-6P1I(25.2V) | Mascot 2041 - 6 Cell LI Ion Battery Charger 2 Amp | Matches 25.2V peak voltage for 6S Lithium-Ion configurations. | Compare |
| GC60B-7P1J(29.4V) | Mascot 2041 - 7 Cell LI Ion Battery Charger 2 Amp | Provides the necessary 29.4V charge voltage for 7-cell lithium-ion arrays. | Compare |
| GC60B-8P1J(33.6V) | Mascot 2041 - 8 Cell LI Ion Battery Charger 1 7 Amp | Specifically designed for 33.6V (8S) Lithium voltage requirements. | Compare |
| GC60A12-P1J | Mascot 2042 - 12v Battery Charger Sla 4 Amp Switch Mode | The GC60A12-P1J is a common desktop alternative for 12V SLA applications with similar current. | Compare |
| GC60A24-P1J | Mascot 2042 - 24v Battery Charger Sla 2 Amp Switch Mode | Matches 24V output for SLA charging with a standard desktop form factor. | Compare |
| PB-120P-40 | Mascot 2042 - 36v Battery Charger Sla 1 4 Amp Switch Mode | High-voltage SLA charger suited for 36V mobility or industrial packs. | Compare |
| NPB-120-48X | Mascot 2042 - 14 Cell LI Ion Battery Charger 1 Amp | Industrial 3-stage charger configurable for 14S Li-ion battery strings. | Compare |
| GC120A12-AD1 | Mascot 2042 - 3 Cell LI Ion Battery Charger 4 Amp | Standard 12.6V desktop charger for 3S Li-ion series packs. | Compare |
| GC120A12-AD1 (Custom V) | Mascot 2042 - 4 Cell LI Ion Battery Charger 3 5 Amp | Matches the 16.8V float voltage required for 4-cell Li-ion charging. | Compare |
| GC120A24-AD1 (Custom V) | Mascot 2042 - 5 Cell LI Ion Battery Charger 2 Amp | Commonly used 21V desktop charger for 5S Li-ion tool or vacuum batteries. | Compare |
| GC120A48-R7B (Adjusted) | Mascot 2042 - 8 Cell LI Ion Battery Charger 1 7 Amp | Standard industrial charger with specific 8S 29.2V-33.6V output range. | Compare |
| PB-160P-36V | Mascot 2043 - 36v Battery Charger Sla 3 3 Amp Switch Mode | Universal input 3-stage charger covering the 36V charging range (43.8V peak). | Compare |
| PB-300P-12EU | Mascot 2046 - 12v Battery Charger Sla 20 Amp Switch Mode | Standard 2-stage/3-stage charger with EU input cable. | Compare |
| NPB-450-12 EU | Mascot 2044 - 12v Battery Charger Sla 20 Amp Switch Mode | Enclosed 300W charger with high-current stage for large SLA packs. | Compare |
| PB-300P-24-EU | Mascot 2044 - 24v Battery Charger Sla 10 Amp Switch Mode | Reliable 300W series charger for 24V systems with EU mains input. | Compare |
| PB-300P-48 (Adjusted) | Mascot 2044 - 36v Battery Charger Sla 6 7 Amp Switch Mode | Industrial-grade 3-stage desktop charger with universal AC input. | Compare |
| PB-300P-48 | Mascot 2044 - 48v Battery Charger Sla 5 Amp Switch Mode | Reliable industrial charger with 3-stage charging curve for 48V banks. | Compare |
| PB-300P-12 | Mascot 2045 - 12v Battery Charger Sla 20 Amp Switch Mode | Common 300W industrial lead-acid charger widely stocked in the UK. | Compare |
| PB-300P-24 | Mascot 2045 - 24v Battery Charger Sla 10 Amp Switch Mode | Standard industrial 24V desktop charger with 3-stage control. | Compare |
| NPB-450-48 (Configurable) | Mascot 2045 - 36v Battery Charger Sla 6 7 Amp Switch Mode | High-wattage desktop charger; verify voltage adjustment settings for 36V. | Compare |
| PB-120P-12 | Mascot 2047 - 12v Battery Charger Sla 10 Amp Switch Mode | Highly popular 120W desktop charger for lead-acid batteries. | Compare |
| PB-120P-24V | Mascot 2047 - 24 Voltbattery Charger Sla 5 Amp Switch Mode | Popular industrial desktop charger with 3-stage charging and universal input. | Compare |
| PB-120P-48V | Mascot 2047 - 48v Battery Charger Sla 2 5 Amp Switch Mode | Industry-standard 48V charger with passive cooling and LED status indicator. | Compare |
| SGA12E24-P1J | 24v Power Supply 12w AC DC EU Plug | Energy-efficient EU plug-top supply for 24V low-current applications. | Compare |
| SGA12U24-P1JBI | 24v Power Supply 12w AC DC UK Plug | Cost-effective 24V UK plug adapter with standard DC jack. | Compare |
| GC30U-0P1J-NIMH | Mascot 2115 - 3 TO 6 Cell Battery Charger Nimh Nicd 1 3 Amp | Common desktop charger; Mascot 2115 is more compact and specialized for NiMH packs. | Compare |
| GC30B-11P1J-NIMH | Mascot 2115 - 5 TO 10 Cell Battery Charger Nimh Nicd 800ma | Comparable current limit for 10-cell strings; Mascot unit has higher quality mounting options. | Compare |
| GC30U-11P1J-NIMH-MOD | Mascot 2116 - 10 TO 20 Cell Battery Charger Nimh Nicd 400ma | Commercial grade charger; Mascot 2116 is optimized for long-term cycle reliability. | Compare |
| GC30U-2P1J | Mascot 2116 - 3 TO 6 Cell Battery Charger Nimh Nicd 1 3 Amp | Standard NiMH desktop charger with universal input, slightly higher current profile. | Compare |
| GC30B-4P1J | Mascot 2116 - 4 TO 8 Cell Battery Charger Nimh Nicd 1 Amp | Compatible desktop charger for NiMH packs with 1.0A output. | Compare |
| GSM40U12-P1J2 | Mascot 2116 - 5 TO 10 Cell Battery Charger Nimh Nicd 800ma | Medical grade charger, often used as a high-reliability alternative for 10-cell packs. | Compare |
| GC30B-5P1J | Mascot 2116 - 6 TO 12 Cell Battery Charger Nimh Nicd 700ma | Compact charger suitable for higher cell counts with intelligent termination. | Compare |
| GST18B15-P1J | 13 2V Power Supply 10w AC DC EU Fixed Power Cable | Desktop PSU with similar 13.5V output and 1A rating. | Compare |
| GST18B15-P1J16V | 16v Power Supply 10w AC DC EU Plug Universal Input Voltage | Closest standard voltage match in the GST series for 16V requirements. | Compare |
| GST18A24-P1JJ | 24v Power Supply 10w AC DC 3 Pin Iec Socket Unterminated DC Cable | Global standard 24V desktop PSU with IEC C14 inlet. | Compare |
| GST18B05-P1J6V | 6V Power Supply 6W AC DC Switch Mode | Energy efficient 6V desktop PSU with 1.2A output. | Compare |
| GST18B09-P1J | 9V Power Supply 9W AC DC Switch Mode | Commonly used 9V desktop PSU for electronics prototyping. | Compare |
| GST25B12-P1J13V | 13 2V Power Supply 10w AC DC Switch Mode | Reliable 12-15V adjustable desktop power supply with IEC inlet. | Compare |
| SGA12E05-P1J (5V/6V range) | 6V Power Supply 6W AC DC EU Fixed Power Cable | Reliable 6V wall-mount, though Mascot 2122 offers a more ruggedized casing. | Compare |
| SGA12E09-P1J | 9V Power Supply 9W AC DC EU Fixed Power Cable | Direct 9V 1.1A competitor with EU fixed plug configuration. | Compare |
| GE12I24-P1J | 24v Power Supply 10w AC DC Exchangeable AC Plugs | Standard interchangeable AC plug series used frequently in UK/EU design. | Compare |
| GE12I07-P1J | 6V Power Supply 6W AC DC Exchangeable AC Plugs | High efficiency 5V-7.5V range unit with interchangeable head system. | Compare |
| GE12I09-P1J | 9V Power Supply 9W AC DC Exchangeable AC Plugs | 9V fixed voltage adapter with global AC plug options. | Compare |
| GE18I12-P1J | 13 2V Power Supply 15w AC DC Exchangeable AC Plugs | High-efficiency 12V 1.25A unit; Mascot 13.2V better suits lead-acid float applications. | Compare |
| GSM18B24-P1J | 24v Power Supply 16w AC DC Switch Mode 1 | Medical grade (60601-1) 18W adapter with higher peak power capability. | Compare |
| SGA18E24-P1J | 24v Power Supply 16w AC DC Switch Mode | Standard industrial 18W wall-mount adapter with fixed plug options. | Compare |
| SGA18E48-P1J | 48v Power Supply 16w AC DC Switch Mode | Commercial grade 48V adapter matching the Mascot voltage and power profile. | Compare |
| GST18E15-P1J | 13 2V Power Supply 15w AC DC Switch Mode EU Fixed Power Cable | Higher power 15V output commonly dialed to 13.2V or used as 13.5V alternative. | Compare |
| SGA18E24-P1J0 | 24v Power Supply 16w AC DC EU Fixed Power Cable | 18W 24V EU plug wall adapter for standard industrial use. | Compare |
| SGA18E48-P1J0 | 48v Power Supply 16w AC DC EU Fixed Power Cable | Commercial 48V DC adapter suitable for low-current applications. | Compare |
| GE18I15-P1J | 16v Power Supply 16w AC DC Exchangeable AC Plugs | Reliable global-certified plugin adapter with exchangeable AC heads. | Compare |
| GE18I24-P1J | 24v Power Supply 16w AC DC Exchangeable AC Plugs | Standard industrial interchangeable head PSU with 24V 0.75A output. | Compare |
| GE24I48-P1J | 48v Power Supply 16w AC DC Exchangeable AC Plugs | One of the few high-voltage interchangeable wall mounts on the market. | Compare |
| GE18I09-P1J | 9 Volt Power Supply 13 5W AC DC EU Fixed Power Cable | Global wall-mount PSU with interchangeable plugs and 9V output. | Compare |
| P60A-1P2J | Mascot 2215 - 10 TO 20 Cell Battery Charger Nimh Nicd 900ma | Standard NiMH charger; Mascot 2215 provides finer cell-count programming for medical compliance. | Compare |
| GC30B-6P1J极 | Mascot 2215 - 4 TO 8 Cell Battery Charger Nimh Nicd 2 2 Amp | 2A global input charger; Mascot 2215 offers better dV/dt termination precision. | Compare |
| GC30U-5P1J极 | Mascot 2215 - 5 TO 10 Cell Battery Charger Nimh Nicd 1 8 Amp | Universal input 1.8A NiMH charger; Mascot 2215 features a more robust UK plug design. | Compare |
| P40A-1P2J极 | Mascot 2215 - 6 TO 12 Cell Battery Charger Nimh Nicd 1 5 Amp | 1.5A charger; Mascot 2215 provides more detailed programmable safety timer options. | Compare |
| GSM60A24-P1J极 | Mascot 2216 - 10 TO 20 Cell Battery Charger Nimh Nicd 900ma | Medical grade PSU adapted for charging; Mascot 2216 includes dedicated NiMH logic. | Compare |
| GC60B-6P1J极针 | Mascot 2216 - 4 TO 8 Cell Battery Charger Nimh Nicd 2 2 Amp | 2.2A capacity with desktop form factor; Mascot 2216 is more resilient to UK grid transients. | Compare |
| SE-600-12 | 13 2V Power Supply 588w AC DC 3 Pin Iec Socket | Industrial 600W supply with adjustable output suited for 13.8V comms equipment. | Compare |
| SE-600-24 | 24v Power Supply 588w AC DC 3 Pin Iec Socket Amd Terminal Blocks | Standard 24V industrial supply with high peak current capability. | Compare |
| GC30B-11P1J | Mascot 2240 - 24v Battery Charger Sla 0 5 Amp Switch Mode | Desktop 3-stage Lead Acid charger for small capacity 24V packs. | Compare |
| GC30B-0P1J | Mascot 2240 - 6V Battery Charger Sla 1 3 Amp Switch Mode | Dedicated 6V Lead Acid charger with energy star efficiency rating. | Compare |
| GC30B-2P1J | Mascot 2240 - 2 Cell LI Ion Battery Charger 1 3 Amp | Standard 2-cell (8.4V) Li-ion desktop charger with LED status. | Compare |
| GC30B-7P1J | Mascot 2240 - 7 Cell LI Ion Battery Charger 560ma | High-voltage output desktop charger matching the 29.4V peak for 7S packs. | Compare |
| GC30U-1P1J | Mascot 2241 - 12v Battery Charger Sla 1 Amp Switch Mode | Ultra-compact 12V 1A charger often used in alarm and security systems. | Compare |
| GC30U-11P1J | Mascot 2241 - 24v Battery Charger Sla 0 5 Amp Switch Mode | Matching 24V output desktop charger for lead-acid maintenance. | Compare |
| PB-120P-54C-ALTX | Mascot 2241 - 48v Battery Charger Sla 0 27amp Switch Mode | Rare 48V output for low-current SLA maintenance and sensor arrays. | Compare |
| GC30U-0P1J | Mascot 2241 - 1 Cell LI Ion Battery Charger 1 3 Amp | Compact standard 4.2V charger often used as a lower-cost alternative to the 2241. | Compare |
| GC30U-4P1J | Mascot 2241 - 4 Cell LI Ion Battery Charger 900ma | 16.8V charger matching 4S Li-ion cell voltage requirements. | Compare |
| GC30A-5P1J | Mascot 2241 - 5 Cell LI Ion Battery Charger 700ma | Matches the 21.0V peak charging voltage required for 5-cell Li-ion strings. | Compare |
| GC30A-6P1J | Mascot 2241 - 6 Cell LI Ion Battery Charger 600ma | Higher wattage alternative for 24V nominal (25.2V peak) 6S Li-ion systems. | Compare |
| GC30A-7P1J | Mascot 2241 - 7 Cell LI Ion Battery Charger 560ma | Alternative 7S charger commonly used for e-mobility and 29.4V peak packs. | Compare |
| GC30U-0P1J-MOD | Mascot 2241 - 1 Cell Battery Charger Lifepo4 1 3 Amp | CC/CV charger with 3.6V termination suitable for single-cell LiFePO4. | Compare |
| GC60A-1P1J-7.2V | Mascot 2241 - 2 Cell Battery Charger Lifepo4 1 3 Amp | 7.2V termination charger optimized for 2S LiFePO4 chemistry. | Compare |
| GC30U-05 | Mascot 2241 - 8 Cell Battery Charger Lifepo4 0 56 Amp | Medical safety approved low-current charger for LiFePO4 packs. | Compare |
| PB-600-12 | Mascot 2245 - 12v Battery Charger Sla 40 Amp Switch Mode | High-efficiency 3-stage lead-acid charger for 12V systems. | Compare |
| PB-600-24 | Mascot 2245 - 24v Battery Charger Sla 20 Amp Switch Mode | Reliable 24V/20A industrial battery charger for backup systems. | Compare |
| RPB-1600-48 | Mascot 2415 - 10 TO 20 Cell Battery Charger Nimh Nicd 1 8 Amp | Programmable charger series often matched for multi-cell NiMH applications. | Compare |
| GC120A18-AD1 | Mascot 2415 - 5 TO 10 Cell Battery Charger Nimh Nicd 3 5 Amp | Universal charger for 5-10 cell packs; robust desktop enclosure. | Compare |
| GST90A24-P1M | 24v Power Supply 70w AC DC 2 Pin Iec Socket | Widely used 24V desktop PSU with a C8 (2-pin) inlet option. | Compare |
| GST90A36-P1M | 36v Power Supply 70w AC DC 2 Pin Iec Socket | Standard industrial 36V desktop power supply with multi-country approvals. | Compare |
| GST90A48-P1M | 48v Power Supply 72w AC DC 2 Pin Iec Socket | Universal input 48V desktop adapter often used as a standard 1.5A source. | Compare |
| GST40A05-P1J | 5V Power Supply 27w AC DC 2 Pin Iec Socket | High-current 5V desktop supply, though slightly larger footprint than the Mascot. | Compare |
| PB-120P-13C2 | Mascot 2440 - 12v Battery Charger Sla 4 Amp Switch Mode | Dedicated 3-stage desktop battery charger with LED status indicators. | Compare |
| HEP-100-12A | Mascot 2443 - 12v Battery Charger Sla 4 Amp Switch Mode | IP67 ruggedized charger suitable for harsh environments. | Compare |
| HEP-100-24A | Mascot 2444 - 12v Battery Charger Sla 4 Amp Switch Mode | Harsh environment charger with IP67 rating; slightly higher amperage. | Compare |
| GC60B24-P1J-EU | Mascot 2445 - 12v Battery Charger Sla 4 Amp Switch Mode | Standard 24V desktop charger with fixed EU plug options. | Compare |
| GC120A48-P1J | Mascot 2440 - 12 Cell LI Ion Battery Charger 1 45 Amp | Ideal for 50.4V (12S) Li-ion termination voltage. | Compare |
| GC160A48-P1JShort | Mascot 2440 - 13 Cell LI Ion Battery Charger 1 35 Amp | Fits 54.6V (13S) requirements for 48V nominal lithium packs. | Compare |
| NPB-120-48XHV | Mascot 2440 - 14 Cell LI Ion Battery Charger 1 3 Amp | Common for 58.8V (14S) peak charging environments. | Compare |
| GC60B-11-ADJ | Mascot 2440 - 15 Cell LI Ion Battery Charger 1 15 Amp | Standard 60V industrial charger, though Mascot offers more precise 15-cell (63V) termination. | Compare |
| GC60B-11-SET | Mascot 2440 - 16 Cell LI Ion Battery Charger 1 Amp | Closest standard wattage match, requires check for exact 67.2V termination. | Compare |
| GC60B-2P1J | Mascot 2440 - 3 Cell LI Ion Battery Charger 4 Amp | Global safety approvals make this a standard alternative for 10.8V/11.1V packs. | Compare |
| GC60B-3P1J | Mascot 2440 - 4 Cell LI Ion Battery Charger 3 5 Amp | Highly available alternative with 16.8V termination for 4-cell packs. | Compare |
| GC60B-4P1J | Mascot 2440 - 5 Cell LI Ion Battery Charger 3 3 Amp | 21V charger suitable for 5-cell lithium power tool or medical packs. | Compare |
| GC60B-5P1J | Mascot 2440 - 6 Cell LI Ion Battery Charger 2 8 Amp | Industrial grade 25.2V charger for 6-cell lithium-ion systems. | Compare |
| GC60B-11-33V | Mascot 2440 - 8 Cell LI Ion Battery Charger 2 1 Amp | Standard 33.6V charger for 8-cell industrial battery packs. | Compare |
| GC60B-11-38V | Mascot 2440 - 9 Cell LI Ion Battery Charger 1 9 Amp | Closest standard voltage for 9-cell (37.8V) configurations; check termination levels. | Compare |
| ENC-120-48 | Mascot 2440 - 11 Cell Battery Charger Lifepo4 1 8 Amp | Configurable desktop charger covering high-voltage lithium packs like the 11-cell series. | Compare |
| GC120A7-ADJ | Mascot 2440 - 2 Cell Battery Charger Lifepo4 4 Amp | Low-voltage lithium charger matching the 4A current requirement for 2-cell packs. | Compare |
| GC30B-11P1J-42V | Mascot 2541 - 10 Cell LI Ion Battery Charger 800ma | High-voltage desktop charger for 36V/42V systems; Mascot 2541 has more specific medical safety approvals. | Compare |
| GC30B-12S-50V | Mascot 2541 - 12 Cell LI Ion Battery Charger 700ma | Dedicated charger for 12S lithium packs; Mascot provides higher efficiency in a similar form factor. | Compare |
| GC30B-14S-58V | Mascot 2541 - 14 Cell LI Ion Battery Charger 600ma | Matches the ~58.8V peak for 14S lithium; Mascot 2541 is lighter and often easier to certify for IEC 60601-1. | Compare |
| GC30B-2P1J-8.4V | Mascot 2541 - 2 Cell LI Ion Battery Charger 2 7 Amp | Efficient 8.4V output for 2-cell packs; Mascot 2541 offers superior transient protection. | Compare |
| GC30B-4P1J-16V4 | Mascot 2541 - 4 Cell LI Ion Battery Charger 2 Amp | Standard 4S Li-ion (16.8V) charger; Mascot 2541 is more robust against UK mains fluctuations. | Compare |
| GC30B-5P1J-18V21V | Mascot 2541 - 5 Cell LI Ion Battery Charger 1 6 Amp | Standard 21V desktop Li-ion charger widely stocked in the UK market. | Compare |
| GC30B-6P1J-25.2V | Mascot 2541 - 6 Cell LI Ion Battery Charger 1 4 Amp | Common industrial desktop charger providing comparable 25.2V output. | Compare |
| GS40A05-P1J-3.6V | Mascot 2541 - 1 Cell Battery Charger Lifepo4 2 7 Amp | Lower voltage industrial adapter often used in 3.6V/3.7V single-stage charging. | Compare |
| NPB-120-48-ADJ | Mascot 2541 - 12 Cell Battery Charger Lifepo4 0 7 Amp | Industrial series capable of reaching the ~43.8V termination voltage for 12S LiFePO4. | Compare |
| GC30B-11-14.4V | Mascot 2541 - 4 Cell Battery Charger Lifepo4 2 Amp | Industry standard 4-cell (12.8V nominal) LiFePO4 desktop charger. | Compare |
| GC30B-14-28.8V60 | Mascot 2541 - 8 Cell Battery Charger Lifepo4 1 Amp | Matches the 28.8V requirement for 8-cell (24V nominal) LiFePO4 packs. | Compare |
| GC30U-0P1J-1S | Mascot 2542 - 1 Cell LI Ion Battery Charger 2 7 Amp | Adjustable desktop power unit often configured for 1S li-ion charging. | Compare |
| GC160A48-R7B | Mascot 2542 - 14 Cell LI Ion Battery Charger 600ma | Customizable GC series output tailored for 14-cell 58.8V peak charging. | Compare |
| GC30U-4P1J-3S | Mascot 2542 - 3 Cell LI Ion Battery Charger 2 3 Amp | Direct 12.6V peak voltage charger for 3S li-ion configurations. | Compare |
| GC30B-5P1J-4S | Mascot 2542 - 4 Cell LI Ion Battery Charger 2 Amp | Standardized 16.8V charger for 4-cell medical or portable instrumentation. | Compare |
| GC30E-7P1J | Mascot 2542 - 7 Cell LI Ion Battery Charger 1 2 Amp | 29.4V output suitable for 7S Li-ion series packs. | Compare |
| GC30U-11P1J-8S | Mascot 2542 - 8 Cell LI Ion Battery Charger 1 Amp | 33.6V charger for 8S lithium packs in a similar desktop format. | Compare |
| GC30U-2S-LFP | Mascot 2542 - 2 Cell Battery Charger Lifepo4 2 7 Amp | 7.2V configured charger for 2S LiFePO4 packs. | Compare |
| GC30U-4S-LFP | Mascot 2542 - 4 Cell Battery Charger Lifepo4 2 Amp | 14.4V 4-stage charger for 12.8V LiFePO4 systems. | Compare |
| GC30B-8S-LFP | Mascot 2542 - 8 Cell Battery Charger Lifepo4 1 Amp | 28.8V charger specifically for 8S LiFePO4 configurations. | Compare |
| GSM40A21-P1J | Mascot 2544 - 5 Cell LI Ion Battery Charger 1 6 Amp | 21V output configured for 5S lithium chemistry with medical-grade safety options. | Compare |
| PB-120P-24V-ADJ | Mascot 2641 - 24v Battery Charger Sla 2 X 1 Amp Switch Mode | Reliable switch-mode charger for 24V battery systems with universal AC input. | Compare |
| SGA12E12-P1J | 12v Power Supply 7 2W AC DC Female Connector Doe Level IV | Universal AC input plug-top adapter with standard 12V DC output. | Compare |
| SGA12E05-P1J | 5V Power Supply 5W AC DC DC Power Connector Doe Level IV | Industry standard 5V wall adapter with fixed UK plug. | Compare |
| SGA12E06-P1J | 6V Power Supply 6W AC DC Female Connector Doe Level IV | Standard plug mount adapter for electronic equipment requiring 6V rail. | Compare |
| GSM06E07-P1J | 7 5V Power Supply 5 5W AC DC DC Power Connector Doe Level IV | General purpose wall mount PSU commonly used in small equipment. | Compare |
| GC30E-11P1J | Mascot 2740 - 12v Battery Charger Sla 0 7 Amp Switch Mode | Compact desktop lead-acid charger for low-capacity cells. | Compare |
| GC30E-2P1J | Mascot 2740 - 24v Battery Charger Sla 0 35 Amp Switch Mode | Small form factor 24V charger for industrial mobility. | Compare |
| GC30E-0P1J | Mascot 2740 - 48v Battery Charger Sla 0 18 Amp Switch Mode | High voltage desktop charger for standby sets. | Compare |
| GC30E-1P1J | Mascot 2740 - 6V Battery Charger Sla 1 Amp Switch Mode | Versatile switch-mode charger for small 6V lead-acid units. | Compare |
| GC30U-0P1J (4.2V) | Mascot 2740 - 1 Cell LI Ion Battery Charger 1 Amp | Widely available wall-mount lithium-ion smart charger. | Compare |
| GC30E-5P1J | Mascot 2740 - 4 Cell LI Ion Battery Charger 600ma | Constant current/constant voltage charger suited for 4-cell 16.8V Li-ion strings. | Compare |
| GSM40A20-P1R | Mascot 2740 - 5 Cell LI Ion Battery Charger 500ma | Medical grade 21V desktop charger equivalent for 5-cell lithium configurations. | Compare |
| GC30E-6P1J | Mascot 2740 - 6 Cell LI Ion Battery Charger 400 Amp | Higher wattage alternative suited for 25.2V termination requirements. | Compare |
| GST120A15-R7B | 16v Power Supply 102w AC DC 2 Pin Iec Socket | 15V-16V adjustable desktop unit with global safety certifications. | Compare |
| GST120A24-R7B | 24v Power Supply 101w AC DC Linear Power Supply 2 Pin Iec Socket | Direct equivalent power rating with 24V DC regulated output. | Compare |
| GST120A24-P1M | 28v Power Supply 106w AC DC 2 Pin Iec Socket | Desktop industrial PSU with 24-30V adjustable output range. | Compare |
| GST120A48-R7B | 48v Power Supply 101w AC DC 2 Pin Iec Socket | Standard 48V desktop adapter with high efficiency. | Compare |
| GC120A54-AD1 | Mascot 2840 - 13 Cell LI Ion Battery Charger 1 8 Amp | Desktop charger series capable of reaching 54.6V for 13S packs. | Compare |
| GC120A07-AD1 | Mascot 2840 - 2 Cell LI Ion Battery Charger 8 Amp | Standard 8.4V Li-ion charger widely used in portable medical devices. | Compare |
| GC120A15-AD1 | Mascot 2840 - 4 Cell LI Ion Battery Charger 6 Amp | Industry standard 16.8V charger for 4-cell Li-ion packs. | Compare |
| GC120A28-AD1 | Mascot 2840 - 7 Cell LI Ion Battery Charger 3 5 Amp | Fits 7-cell 29.4V Li-ion requirements for electric mobility. | Compare |
| HEP-100-36 (Adj) | Mascot 2840 - 8 Cell LI Ion Battery Charger 3 Amp | Standard 33.6V charger for 8-cell Lithium-ion configurations. | Compare |
| GC120A48-AD1 (modified) | Mascot 2840 - 9 Cell LI Ion Battery Charger 2 7 Amp | 37.8V peak charger suitable for 9S Lithium-ion packs. | Compare |
| PB-120P-36V-LI71 | Mascot 2840 - 10 Cell Battery Charger Lifepo4 2 8 Amp | Industrial 36V/42V charger suitable for 10-cell LiFePO4 charging. | Compare |
| PB-120P-48V-LI80 | Mascot 2840 - 13 Cell Battery Charger Lifepo4 2 15 Amp | Industrial 48V nominal charger compatible with 13S LiFePO4 (47.45V). | Compare |
| PB-120P-30V | Mascot 2840 - 9 Cell Battery Charger Lifepo4 3 1 Amp | Configurable output often used for 9-cell custom LiFePO4 packs. | Compare |
| GST280A24-C6P6 | 12v Power Supply 270w AC DC Fixed UK Mains Cord 1 | High-power industrial desktop unit with 3-pin UK mains lead. | Compare |
| GST18A48-P1J | 48v Power Supply 16w AC DC Erp Directive Compliant | Standard desktop PSU with fixed input plug options. | Compare |
| GST18U09-P1J | 9V Power Supply 13 5W AC DC Exchangeable AC Plugs | Industry standard 15W wall adapter with high reliability. | Compare |
| GST18E12-P1JXR | 13 2V Power Supply 15w AC DC Switch Mode | 12V standard adapter; requires verification if 13.2V is critical for the application. | Compare |
| NPB-450-12TB休 | Mascot 2945 - 12v Battery Charger Sla 20 Amp Switch Mode | Compact chassis-mount charger with broad voltage input sensitivity. | Compare |
| GST120A12-R7B | 13 2V Power Supply 103w AC DC Exchangeable AC Plugs | Equivalent desktop PSU with 12V-15V adjustable range and C8 input. | Compare |
| RPB-160-48 | Mascot 3240 - 12 Cell LI Ion Battery Charger 2 Amp | Matches 50.4V termination for 12S lithium packs with medical-grade pedigree typical of Mascot. | Compare |
| GC120A07-ADJ | Mascot 3240 - 2 Cell LI Ion Battery Charger 8 Amp | Desktop form factor providing 8.4V for 2S Li-ion medical and commercial devices. | Compare |
| GC120A20-R7B | Mascot 3240 - 5 Cell LI Ion Battery Charger 4 5 Amp | Reliable 21V output specifically for 5S Li-ion power tool or medical packs. | Compare |
| GC120A30-R7B | Mascot 3240 - 8 Cell LI Ion Battery Charger 3 Amp | Standard 33.6V output version for 8S lithium ion battery series. | Compare |
| NPB-240-36 | Mascot 3543 - 3 Cell LI Ion Battery Charger 20 Amp | The 36V variant (42V peak) is a common replacement for 10-cell Li-ion profiles. | Compare |
| GC220A24-R7B | Mascot 3541 - 3 Cell LI Ion Battery Charger 20 Amp | Standard 24V Li-ion charger often used for 6-cell power tool or mobility packs. | Compare |
| ENC-240-48 | Mascot 3544 - 3 Cell LI Ion Battery Charger 20 Amp | Standard 48V (54.6V) profile matches 13S Li-ion requirements. | Compare |
| NPB-450-72 | Mascot 3545 - 3 Cell LI Ion Battery Charger 20 Amp | Capable of 58.8V boost for 14S Li-ion/52V systems. | Compare |
| NPB-360-12 | Mascot 3540life 4 Cell | Widely available industrial alternative for 4-cell LiFePO4. | Compare |
| GC30U-0P1J-LFP | Mascot 3756 - 3 Cell LI Ion Battery Charger 1 2 Amp | Dedicated 6.4V/7.2V LiFePO4 charging profile with safety approvals. | Compare |
| GC30B-4P1J-LFP | Mascot 3757 - 3 Cell LI Ion Battery Charger 1 2 Amp | Commonly used 14.4V (4-cell) LiFePO4 charger with high efficiency. | Compare |
| GST120A36-R7B | Mascot 3820 12v DC 100w AC DC Switch Mode Power Supply 2 | Alternative industrial adapter with slightly higher 36V output that can be adjusted or matched. | Compare |
| GST120A36-P1M | Mascot 3820 12v DC 100w AC DC Switch Mode Power Supply 3 | 36V 3.33A desktop industrial power supply with global safety approvals. | Compare |
| GST120A48-P1M | Mascot 3820 12v DC 100w AC DC Switch Mode Power Supply 4 | Industry standard 48V 2.5A power adapter for PoE and industrial networking. | Compare |
| PB-120N-13C | Mascot 3570 - 3 Cell LI Ion Battery Charger 2 2 Amp | Industrial grade charger suitable for larger NiMH banks with similar current profiles. | Compare |
| GS12E05-P1I | 5V Power Supply 4W AC DC EU Plug | Standard 5V switcher variant for general IoT/USB applications. | Compare |
| GST40A12-P1J | 12v Power Supply 40w AC DC Doe Level VI And Coc Tier 2 | Universal input 40W desktop PSU with Level VI efficiency. | Compare |
| GST40A24-P1J | 24v Power Supply 40w AC DC Switch Mode | Industry standard 24V 40W desktop power supply. | Compare |
| GST25A12-P1J | 12v Power Supply 25w AC DC Fixed UL Mains Cord Push ON Terminals | Universal AC input 12V 25W wall-mount or desktop adapter. | Compare |
| GST25A24-P1J | 24v Power Supply 25w AC DC Efficiency Level VI | Compact 24V 25W adapter popular in industrial automation. | Compare |
| GST18A12-P1J | 12v Power Supply 15w AC DC Doe Level VI Coc Tier 2 | Small form factor 12V 1.25A desktop power supply. | Compare |
| GST18A24-P1J | 24v Power Supply 15w AC DC Switch Mode | Standard 24V 15W switched mode power supply. | Compare |
| GSM06E15-P1J | 15v Power Supply 2 5W AC DC Linear Power Supply | Medical grade compact 15V output adapter available via Farnell/RS. | Compare |
| GST18E24-P1J | 24v DC Linear Power Supply 10w AC DC | Standard 24V 0.5A switching adapter available through UK distribution. | Compare |
| GST12E12-P1J | 12v Power Supply 7W AC DC Linear Power Supply | Common 12V 1A wall plug; check for linear requirements in audio/medical. | Compare |
| GST12E24-P1J | 24v Power Supply 7 5W AC DC Linear Power Supply | Compact 24V switching supply for small electronics. | Compare |
| GST12E05-P1J | 5V Power Supply DC 4W AC DC Linear Power Supply | 5V 1A switching alternative; Mascot unit is linear for low-ripple needs. | Compare |
| GST280A12-C6P Cor | 12v Power Supply 270w AC DC Fixed UK Mains Cord | Industrial desktop PSU with similar power density but uses IEC C14 inlet instead of fixed cord. | Compare |
| GST280A12-C6P alt | 13 5V Power Supply 270w AC DC Fixed EU Mains Cord | Universal input desktop supply, though 13.5V is often substituted with an adjustable 12V/15V unit. | Compare |
| GST280A24-C6P | 24v Power Supply 290w AC DC Fixed EU Mains Cord | Standard 24V industrial desktop PSU; Mascot 8921 offers more rugged housing for EU markets. | Compare |
| GST280A48-C6P | 48v Power Supply 290w AC DC Fixed EU Mains Cord | Direct 48V output equivalent, frequently stocked in European distribution hubs. | Compare |
| GST40A12-P1J alt | 13 2V Power Supply 46w AC DC Fixed EU Mains Cord | Fixed voltage 12V supply; Mascot's 13.2V is often optimized for lead-acid standby. | Compare |
| GST40A15-P1J | 16v Power Supply 46w AC DC Fixed EU Mains Cord | Common 15V desktop PSU commonly cross-referenced to 16V Mascot units. | Compare |
| GST40A24-P1JCor | 24v Power Supply 46w AC DC Fixed EU Mains Cord | Industry standard 24V 40W desktop PSU with wider global approvals. | Compare |
| GST90A12-P1M | 13 2V Power Supply 70w AC DC 3 Pin Iec Socket EU Mains Cord 2 | Standard 12V supply; Mascot's 13.2V is specifically tuned for lead-acid standby or automotive emulation. | Compare |
| GST90A15-P1M | 16v Power Supply 70w AC DC Fixed EU Mains Cord | Closest standard voltage match (typically 15V); 16V is a niche Mascot specialty voltage. | Compare |
| SDR-75-24 | 24v Power Supply 70w AC DC Fixed EU Mains Cord Din Bracket | Standard PSU with separate bracket; Mascot provides an all-in-one DIN rail factory solution. | Compare |
| AD-55A | Mascot 9322 - 13 2V Power Supply 70w AC DC EU Fixed Power Cable | Matches 13.2V requirement often used for radio/comms equipment but lacks the integrated lighter socket. | Compare |
| GSM12E12-P1J | 12v Power Supply 10w AC DC EU Plug Medical Switch Mode | Standard medical power adaptor (60601-1) with EU fixed plug. | Compare |
| GSM12U12-P1J | 12v Power Supply 10w AC DC EU Plug Medical Switch Mode 1 | Direct medical-spec equivalent with fixed UK plug pins. | View product |
| GSM12E15-P1J | 16v Power Supply 10w AC DC EU Plug Medical Switch Mode | 15V is the standard industry equivalent; Mascot provides a precise 16V rail for specific medical devices. | Compare |
| GSM12E24-P1J | 24v Power Supply 10w AC DC EU Plug Medical Switch Mode | Industry standard 24V medical adaptor with universal input. | Compare |
| GSM06E05-P1J | 5V Power Supply 4W AC DC EU Plug Medical Switch Mode | Fixed EU plug medical wall adaptor for 5V applications. | Compare |
| GSM12E07-P1J | 7 5V Power Supply 6W AC DC EU Plug Medical Switch Mode | Medical grade wallmount; 7.5V is a standard option in this series. | Compare |
| GSM12E09-P1J | 9V Power Supply 7 2W AC DC EU Plug Universal Input Voltage | 9V DC medical adaptor with standard barrel jack and EU pins. | Compare |
| GST40A18-P1J | 18v Power Supply 40 8W AC DC Switch Mode | Standard AC/DC desktop adapter with 18V output. | Compare |
| GST40A07-P1J | 7 5V Power Supply 23 4W AC DC Switch Mode | Standard 7.5V desktop adapter often used for specialty DC hardware. | Compare |
| GST120A12-P1M | 13 2V Power Supply 95w AC DC 2 Pin Iec Socket | Equivalent desktop PSU outputting 12-15V DC for high-wattage loads. | View product |
| GC30U-6P1J | Mascot 9642 - 24v Battery Charger Sla 1 5 Amp Switch Mode | Equivalent 3-stage charger but typically requires a separate UK mains lead. | View product |
| PB-120P-36P12J | Mascot 9641 - 36v Battery Charger Sla 1 Amp Switch Mode | Specialist 36V DC output charger for electric scooter and tool batteries. | View product |
| GC30B-2Cell-LI | Mascot 9641 - 2 Cell LI Ion Battery Charger 2 7 Amp | Adaptable desktop charger configured for 2-series lithium charging. | View product |
| GC30B-4P1J-LI | Mascot 9641 - 4 Cell LI Ion Battery Charger 2 4 Amp | Common industrial 4-cell (14.8V) lithium-specific power supply/charger. | View product |
| GC30U-5P1J-5S | Mascot 9641 - 5 Cell LI Ion Battery Charger 1 5 Amp | Standard 18V/21V charger often used for 5S packs, though Mascot offers superior 3-step control. | View product |
| GC30U-6P1J-6S | Mascot 9641 - 6 Cell LI Ion Battery Charger 1 5 Amp | Standard desktop charger for 6-cell (22.2V/25.2V) lithium-ion systems. | View product |
| GC30U-7P1J-7S | Mascot 9641 - 7 Cell LI Ion Battery Charger 1 5 Amp | Widely available 29.4V output for 7-cell configurations (24V nominal). | View product |
| SGA12E05-P1J-UK | 5V Power Supply 5W AC DC DC Power Connector Switch Mode | Standard 1A/5V plug-top; Mascot offers superior mechanical cable strain relief. | View product |
| GST18A07-P1J | 7 5V Power Supply 5 5W AC DC DC Power Connector Switch Mode | Compact 7.5V desktop adapter; requires 7.5V-specific power rail. | Compare |
| GST18E09-P1J | 9V Power Supply 6W AC DC DC Power Connector Switch Mode | Widely available 9V wall adapter with 5.5mm DC connector. | View product |
| PB-120P-54C (Adjusted) | Mascot 9740 - 36v Battery Charger Sla 3 3 Amp Switch Mode | Standard 36V charging profile compatible with Mascot parameters. | View product |
| GSM40A12-P1J | 13 2V Power Supply 36w AC DC Fixed EU Mains Cord | Medical (60601-1) approved desktop PSU with 12V output. | Compare |
| GSM40A24-P1J | 24v Power Supply 39w AC DC Switch Mode | Medical grade 24V supply meeting 2xMOPP standards. | Compare |
| SGA25E12-P1J | 12v 19w Switch Mode Power Supply With AN EU Base | Compact Euro plug-top switcher with similar 19W-20W capacity. | Compare |
| SGA25E15-P1J | 15v 24w Switch Mode Power Supply With AN EU Base | 24W switch-mode Euro plug-in with standard 15V output. | Compare |
| SGA25E24-P1J | 24v 21 5W Switch Mode Power Supply With AN EU Base | Industry standard 24V wall-mount though often requires a global plug adapter compared to fixed EU base. | Compare |
| SGA18E07-P1J | 6V 11w Switch Mode Power Supply With AN EU Base | Standard SGA series wall mount with 7.5V output (requires check for 6V derating/adjustability). | View product |
| GC120A24-E1 | Mascot 9840 - 24v Battery Charger Sla 2 5 Amp Switch Mode | Functional equivalent 24V SLA charger with standard EU lead. | View product |
| SGA12U12-P1J | 12v Power Supply 12w AC DC Female DC Connector UK Plug | Global standard UK wall mount supply with 12V regulated output. | View product |
| GST18A05-P1J | 5V 17 5W Switch Mode Power Supply | High-efficiency switch-mode desktop supply with universal input. | Compare |
| GST25A09-P1J | 9V 27w Switch Mode Power Supply | Standard 9V desktop PSU with safety approvals for mass-market. | Compare |
| GST25A05-P1J | 9V 27w Switch Mode Power Supply 42 | Energy efficient 5V 4A adapter exceeding the Mascot current rating. | Compare |
| SGA12U12-P1JJP | 12v Power Supply 12w AC DC DC Power Connector Switch Mode | Commercial grade 12V adapter from the SGA series. | View product |
| GST18A18-P1J | 15 20v Power Supply 12w AC DC Switch Mode Supply Adjustable | Standard 18V output desktop PSU covering the mid-range of this adjustable unit. | Compare |
| SGA12E24-P1JV | 24v Power Supply 12w AC DC Female DC Connector Switch Mode | Compact 24V supply commonly found in Farnell and RS. | View product |
| GP25A13A-R1B | 4 5 TO 10v Power Supply 10 8W AC DC Switch Mode Supply Adjustable | Offers adjustable output via internal trim but lacks the Mascot 9923's modularity. | View product |
| GE12I05-P1J-C4.5V | 4 5V Power Supply 5 4W AC DC DC Power Connector Switch Mode | Common multi-blade adapter, though 4.5V fixed is less common than 5V in their standard lines. | View product |
| SGA12E07-P1J | 7 5V Power Supply 9W AC DC DC Female Connector Switch Mode | Standard 7.5V adapter; Mascot is preferred when specific DC connector polarities are required. | View product |
| GST40A12-P1I | 13 2V Power Supply 40w AC DC 3 Pin Iec Socket Terminal Blocks | Workhorse 40W desktop PSU with wider universal input range. | Compare |
| GST40A48-P1J | 48v Power Supply 40w AC DC Switch Mode Female Connector | Highly available 48V adapter often used for PoE injectors. | Compare |
| PB-120P-48 (Adjusted) | Mascot 9940 - 36v Battery Charger Sla 0 9 Amp Switch Mode | Matches 36V nominal output, though the Mascot unit is significantly smaller for portable use. | View product |
| GC30U-11P1J (Specialist) | Mascot 9940 - 6 Cell LI Ion Battery Charger 1 3 Amp | 25.2V termination for 6-cell packs; Mascot is slimmer and utilizes a standard 3-step charging profile. | View product |
| GC120A48-AD1 (Adjusted) | Mascot 9940 - 8 Cell LI Ion Battery Charger 1 Amp | Standard 33.6V charging for 8-cell packs; Mascot 9940 is lighter and more compact. | View product |
| GC30B-6P1J24 | Mascot 9941 - 24v Battery Charger Sla 1 3 Amp Switch Mode | Common desktop alternative for 24V lead-acid charging, though lack of Mascot's specific timer function. | View product |
| PB-120P-36 | Mascot 9941 - 36v Battery Charger Sla 0 9 Amp Switch Mode | Industrial grade 36V charging profile, widely available in the UK. | View product |
| GC30U-4P1J11 | Mascot 9640 - 3 Cell LI Ion Battery Charger 2 3 Amp | Set for 12.6V terminal voltage (3s) with standard barrel jack. | View product |
| GC30B-5P1J14 | Mascot 9641 - 4 Cell LI Ion Battery Charger 2 Amp | Industry-standard 16.8V charger (4s Li-ion) with universal AC input. | View product |
| GC30B-11P1J21 | Mascot 9641 - 5 Cell LI Ion Battery Charger 1 3 Amp | Standardized for 5-cell 21V charging; Mascot offers better documentation for medical applications. | View product |
| GC30B-6P1J25 | Mascot 9641 - 6 Cell LI Ion Battery Charger 1 3 Amp | Configured for 25.2V termination voltage (6s Li-ion). | View product |
| GC30U-7P1J29 | Mascot 9641 - 7 Cell LI Ion Battery Charger 1 3 Amp | Matches 29.4V peak voltage required for 24V nominal (7s) Li-ion packs. | View product |
| GC30B-8P1J33 | Mascot 9641 - 8 Cell LI Ion Battery Charger 1 Amp | Optimized for 33.6V termination in 8-cell Li-ion strings. | View product |
| GST60A18-P1J | 18v Power Supply 60w AC DC Female Connector Doe Level VI Coc Tier 2 | Standard desktop 60W unit with high UK market availability. | Compare |
| GST60A36-P1J | 36v Power Supply 60w AC DC Female Connector Doe Level VI Coc Tier 2 | 36V industrial-standard desktop adapter with universal AC input. | View product |
| GS60A05-P1J | 5V Power Supply 40w AC DC Mascot Blueline 3320 | Note that 5V/8A is high current; may require thicker gauge cable. | View product |
| GS60A07-P1J | 6V Power Supply 40w AC DC Mascot Blueline 3320 | Similar form factor but may require output connector modification. | View product |
| GST60A07-P1J | 7 5V Power Supply 53w AC DC Mascot Blueline 3320 | Matches voltage and efficiency specs for specialized equipment. | Compare |
| GST280A24-C6P Nar | Mascot 3520 - 24v Power Supply 265w AC DC Fixed EU Mains Cord | High power 24V desktop unit with similar load capacity. | Compare |
| GC220A12-AD1 | Mascot 3540 - 4 Cell LI Ion Battery Charger 17 5 Amp | Industrial desktop charger with 3-stage curve for 4S Li-ion. | View product |
| GC220A24-AD1 | Mascot 3540 - 7 Cell LI Ion Battery Charger 10 Amp | Fits standard 24V nominal (7S) Li-ion profiles. | View product |
| NPB-240-24 | Mascot 3540 - 8 Cell Battery Charger Lifepo4 10 Amp | Industrial grade 27.2V termination for 8S LiFePO4 packs. | View product |
| GC30U-4P1J-CLIP | Mascot 3549 - 12v Battery Charger Sla 2 Amp Switch Mode | Direct desktop equivalent with DC jack; requires clip adapter. | View product |
| GC30U-5P1J-CLIP | Mascot 3547 - 24v Battery Charger Sla 1 Amp Switch Mode | Matches the 1A 24V profile; typically sold with barrels. | View product |
| GC30U-2P1J-6V2A | Mascot 3548 - 12v Battery Charger Sla 2 Amp Switch Mode | Rare 6V dedicated charger for heritage vehicles or low-voltage systems. | View product |
| GC30U-2P1J-3S | Mascot 3546 - 3 Cell LI Ion Battery Charger 2 2 Amp | A ubiquitous 12.6V desktop charger; Mascot offers superior customisation for med-tech. | View product |
| GC30U-4P1J-4S | Mascot 3546 - 4 Cell LI Ion Battery Charger 1 6 Amp | Standard 16.8V charger for 4S packs; Mascot 3546 is lighter with exchangeable AC plugs. | View product |
| GC30B-7P1J-7S | Mascot 3546 - 7 Cell LI Ion Battery Charger 1 Amp | Commonly used 29.4V (7S) charger; Mascot 3546 is often preferred for EN 60601 medical builds. | View product |
| GC30B-8P1J-8S | Mascot 3547 - 7 Cell LI Ion Battery Charger 1 Amp | Standard 33.6V charger for 8S configurations. | View product |
| GSM36U12-P1J | 12v DC Linear Power Supply 28w AC DC Coc Tier 2 Switch Mode | Industry standard 12V 30W medical-grade plug-pack. | View product |
| GST25A15-P1J | 15v Power Supply 28w AC DC Coc Tier 2 Switch Mode | Standard industrial desktop adapter with similar 15V output rating. | Compare |
| GST25A18-P1J | 18v Power Supply 28w AC DC Coc Tier 2 Switch Mode | Efficient 18V output desktop power supply suitable for industrial use. | Compare |
| GST25A07-P1J (7.5V) | 6V Power Supply 20w AC DC Coc Tier 2 Switch Mode | Adjustable or fixed 6V-equivalent industrial desktop units. | Compare |
| GST25A07-P1J | 7 5V Power Supply 28w AC DC Coc Tier 2 Switch Mode | Direct 7.5V desktop replacement with DoE Level VI compliance. | Compare |
| GST40A12-P1J (C14) / GST40B12-P11 (C8) | 12v Power Supply 42w AC DC 2 Pin Iec Socket Coc Tier 2 | Industry-standard 12V 40W desktop PSU with C8 (2-pin) inlet. | View product |
| GC30U-5P1J-MOD | Mascot 3745 - 24v Battery Charger Sla 0 56 Amp Switch Mode | Compatible 3-stage charger profile for 24V lead-acid systems. | View product |
| Mean Well GC30B-0P1J (6V) | Mascot 3744 - 12v Battery Charger Sla 1 Amp Switch Mode | Compact 6V charger unit; Mascot offers higher efficiency certifications. | View product |
| Mean Well GC30U-0P1J (4.2V) | Mascot 3743 - 1 Cell LI Ion Battery Charger 1 5 Amp | Small-form factor charger for 1-cell Li-ion applications. | View product |
| Mean Well GC30U-2P1J (12.6V) | Mascot 3743 - 3 Cell LI Ion Battery Charger 1 2 Amp | Standard 12.6V output charger for 3-cell configurations. | View product |
| Mean Well GC30B-4P1J (16.8V) | Mascot 3743 - 4 Cell LI Ion Battery Charger 1 Amp | Universal input 16.8V charger available via RS/Farnell. | View product |
| Mean Well GC30B-5P1V (21V) | Mascot 3743 - 5 Cell LI Ion Battery Charger 800ma | Reliable industrial charger with various DC jack options. | View product |
| Mean Well GC30U-7P1J (29.4V) | Mascot 3743 - 7 Cell LI Ion Battery Charger 560ma | Standard 29.4V output for 7-cell e-scooter or tool applications. | View product |
| Mean Well GC30U-0 (4.2V) | Mascot 3745 - 1 Cell LI Ion Battery Charger 1 5 Amp | Standard desktop charger; Mascot 3745 offers more medical-grade certifications. | View product |
| Mean Well GST18U12-P1J (12V) | 12v Power Supply 16w AC DC Doe Level VI Coc Tier | Widely stocked 12V 1.5A adapter with Level VI efficiency. | View product |
| GST18A15-P1J | 15v Power Supply 16w AC DC Coc Tier 2 Switch Mode | Standard 15V desktop adapter, Mascot offers superior CoC Tier 2 efficiency margins. | Compare |
| GST18A09-P1J | 9V Power Supply 12w AC DC Coc Tier 2 Switch Mode | Common 9V adapter for networking and audio gear; Mascot is Tier 2 compliant. | Compare |
| GS05E-USB | Mascot Blueline 3825 12v DC 7 5W AC DC Switch Mode Power Supply 4 | Standard USB-A output wall charger; Mascot 3825 is built for industrial durability. | View product |
| GEM12I12-P1J | Mascot Blueline 3825 12v DC 7 5W AC DC Switch Mode Power Supply 2 | Standard wall-mount adapter with interchangeable AC heads but fixed DC plug. | View product |
| GST180A24-C6P | 24v Power Supply 10w AC DC 3 Pin Iec Socket Unterminated DC Cable 2 | Highly common 180W desktop unit often used in automation. | View product |
| GST220A36-R7B | 24v Power Supply 10w AC DC 3 Pin Iec Socket Unterminated DC Cable 3 | Direct match for 36V voltage rail in specialized equipment. | View product |
| GST180A48-C6P | 24v Power Supply 10w AC DC 3 Pin Iec Socket Unterminated DC Cable 4 | Common 48V adapter often used for PoE injectors or comms. | View product |
| DC-CONN-01 | Modular Adaptor Cable 1 85 Mtr Long With A Moulded 3635 Plug Center Positive 18 | Quick-connect DC cable; Mascot provides higher isolation ratings for the moulded snap-lock housing. | View product |
| DC-ST-02 | Modular Adaptor Cable 1 85 Mtr Long With AN Unterminated End | Stripped and tinned DC cable; Mascot cable uses higher copper strand counts for better flexibility in cold environments. | View product |